EN 10025 S235J2G3 Galvanized steel coil Yield Strength

The material properties of EN 10025 S235J2G3 Galvanized steel coil have the following meaning:S: Means that this is a structural steel.355: Minimum yield strength (min Re=355 N/mm sq.)J2: Min. Charpy test value= 27J at -20 deg.C;G3: Supply condition. Normalized or normalized rolled.

S235J2G3 Galvanized steel coil is of EN 10025 standard,and this steel grade equals to DIN 17 100 (St 52-3N), BS 4360 (50D), ASTM A 573-65.EN 10025 S235J2G3 Galvanized steel coil is used to engine blade for plane, cartridge receiver, fasterners, combustion chamber, aviation, discs, shaft, outside wall of combustion chamber, liquid oxygen-kerosne diesel, shell, cyclind.

EN 10025 S235J2G3 Galvanized steel coil Specification
Thickness: 3.5-10mm  
Width:1250-1500mm
Length:coil
S235J2G3 Galvanized steel coil Chemical composition(%)
C≤0.17 Mn≤1.40 P≤0.045 S≤0.045
EN 10025 S235J2G3 steel coil Mechanical property
Yield StrengthReH[N/mm2] transv.min:235,225  TensileStrengthRm[N/mm2]transv.: 360-510 340-470  Fracture Elongation[%]transv.min.:16-24  Notch Impact Energy1)Ch Vcomplete samplelongitud. min [J]: Degree: 0 AV: 27J
Surface treatment : Galvanized
Spangle: Zero/Min/Regular/Bright spangle

BEBON has a very good reputation for S235J2G3 Galvanized steel coil in the dealings of customers.If you have any requirements of EN 10025 S235J2G3 steel coil,if you believe us,pls send email to me freely.

Bebon Nicole

HENAN BEBON INTERNATIONAL CO., LTD

Email:queenasteelss@gmail.com

 

AISI 4340 Alloy structural steel tube Sample

AISI 4340 Alloy structural steel tube has good ductility in the annealed condition and most forming operations are carried out in that condition. AISI 4340 steel tube can be bent or formed by spinning or pressing in the annealed state. Bend radii should be 3t or greater. The alloy can be fusion or resistance welded. Preheat and post heat weld procedures should be followed when welding this alloy by established methods.

AISI 4340 ERW steel tube is a heat treatable, low alloy steel containing nickel, chromium and molybdenum. 4340 ERW steel tube is known for its toughness and capability of developing high strength in the heat treated condition while retaining good fatigue strength. Typical applications are for structural use, such as aircraft landing gear, power transmission gears and shafts and other structural parts.

4340 ERW steel tube Specification
Thickness: 0.6mm-3mm
Outer Diameter: 8mm-133mm
AISI 4340 Alloy structural steel tube Chemical composition(%)
Mn:0.60-0.90  S≤0.040  P≤0.035  Cu≤0.025  Cr:0.60-0.90  Ni:1.65-2.00  Mo:0.20～0.30
AISI 4340 steel tube Mechanical property
Tensile strength σb (MPa): ≥980 (100)  Yield strength σs (MPa): ≥835(85)  Hardness: ≤269HB
Elongation δ5 (%): ≥12  Reduction of area ψ (%): ≥55  Impact energy Akv (J): ≥78
Impact toughness αkv (J / cm2): ≥98 (10)  Sample size: Sample size is 25mm rough

If you want to ask specific4340 ERW steel tube information, Welcome to send inquiry to us if you are interested in AISI 4340 Alloy structural steel tube.

Bebon Nicole

HENAN BEBON INTERNATIONAL CO., LTD

Email:queenasteelss@gmail.com

 

ABS Grade D shipbuilding steel plate Hot selling

ABS D shipbuilding steel plate is mainly used for shipbuilding and ship repairing, the offshore oil drilling platform, the platform pipe joints and other components. ABS grade D shipbuilding steel certain degree of strength, toughness and a low resistance and corrosion resistance,ABS grade D shipbuilding steel better weldability.

ABS grade D steel plate is a kind of hot rolled general tensile strength steel. All the ABS/D shipbuilding steel plate offered by BEBON can be certificated by American Bureau of shipping(ABS).The ABS GradeD shipbuilding steel plate have yield strength of 34,100 psi (235 MPa), and ultimate tensile strength of 58,000 - 75,500 psi (400-520 MPa).

ABS Grade D shipbuilding steel plate Specification
Thickness: 6mm-200mm
Width: 1500mm-4000mm
Length: 6000mm-180000mm
ABS Grade D steel Chemical composition(%)
C≤0.21 Mn≥0.6 Si:0.1-0.35 P≤0.035 S≤0.035
ABS D steel plate for shipbuilding Mechanical property
Tensile Strength(MPa):400-520 Yield Strength(MPa):235 Elongation in 2 in.(50mm) min%:22
Adopting Standard: Nine classification societies as CCS, DNV, GL, LR, BV, ABS, NK, KR, RINA
Additional technicals: As your wish, we can provide you AR, CR, TMCP, N or QT Heat treatment, PWHT, UT, Low Temperature Impacting Test, HIC and so on.

BEBON have a high quality logistics team who make sure the fast delivery time and shipment.  We will give you the ABS D competitive price and best service from us.If you need, pls send enquiry to my mailbox,I'll reply to you quickly.

Bebon Nicole

HENAN BEBON INTERNATIONAL CO., LTD

Email:queenasteelss@gmail.com

 

DIN EN 10025-2 S355J2G4 carbon steel plate Specification

DIN EN 10025-2 S355J2G4 carbon steel plate material number is 1.0557. S355J2G4 alloy steel plate is a low carbon steel whose specifications offer high yield strength. This standard has now been replaced by EN10025-2:2004 and steels with the S355J2G4 designation are now known as S355J2.J2 means minus 20 centigrade impacting test,G4 means supplying condition and deoxidation measures.

DIN EN 10025-2 S355J2G4 carbon steel Specification
Thickness: 2mm-650mm
Width: 1000mm-4200mm
Length: 3000mm-18000mm
DIN EN 10025-2 S355J2G4 steel plate Chemical composition(%)
C≤0.20 Si≤0.55 Mn≤1.60 P≤0.035 S≤0.035
S355J2G4 steel plate Mechanical property
Yield Rp0.2 (MPa)≥146 Tensile Rm (MPa)≥871 Impact KV/Ku (J):42 Elongation A (%):24  Reduction in cross section on fracture Z (%):23 As-Heat-Treated Condition: Solution and Aging, Annealing, Ausaging, Q+T,etc Brinell hardness (HBW):224

Bebon steel can supply DIN EN 10025-2 S355J2G4 carbon steel, S355J2G4 alloy steel plate Onsale price and specification ,we are steel suppliers and manufacturer,you can contact us to get DIN EN 10025-2 S355J2G4 carbon steel, S355J2G4 alloy steel plate Onsale application and other informations.
If you have requirements for  DIN EN 10025-2 S355J2G4 carbon steel,pls send your enquiry to my mailbox,I'll reply to you as quickly.

Bebon Nicole

HENAN BEBON INTERNATIONAL CO., LTD

Email:queenasteelss@gmail.com

In China JIS G4311 SUS310S stainless steel round bar Supplier

JIS G4311 SUS310S stainless steel round bar is widely used in metal utensils, ship building, petrochemical,machinery,medicina,food,electricity,energy,construction and decoration,nuclear power, aerospace, military and other industries.

SUS310S Stainless steel round bar is SUS Japanese series austenitic stainless steel. Good oxidation resistance than 0Cr23Ni13. In fact often used as a heat-resistant steel. JIS G4311 SUS310S stainless steel round bar is superior in most environments to 304 or 309 due to its relatively high chromium and nickel content. It exhibits a combination of good strength and corrosion resistance in temperatures up to 2100° F.

IS G4311 SUS310S stainless steel round bar Chemical composition(%)
C ≤0.08 Si≤1.00 Mn≤2.00 S≤0.030 P≤0.035 Cr:24.00～26.00 Ni:19.00～22.00
SUS310S stainless steel round bar Mechanical property
Tensile strength σb (MPa): ≥520 Conditions yield strength σ0.2 (MPa): ≥205
Elongation δ5 (%): ≥40  Reduction of area ψ (%): ≥50  Hardness: ≤187HB; ≤90HRB; ≤200HV
Heat treatment and microstructure:
Heat Specifications: 1030 ~ 1180 ℃ rapid cooling.
Microstructure: Organizing for the austenitic type.
Dimensions: 50--1000mm
Technical: Hot-rolled, Hot-forged, Cold-drawn
Surface: 2B,BA,NO.1.NO.4.HL

Bebon International offer First-class quality and service for SUS310S stainless steel round bar,if you have need of JIS G4311 SUS310S steel bar ,don’t hesitate,to place order.Pls send your inquiry to my mailbox,I will reply as quickly as possible.

Bebon Nicole

HENAN BEBON INTERNATIONAL CO., LTD

Email:queenasteelss@gmail.com